top of page



Unlock the potential of your machining operations with our Diamond Coated Taper Neck Ball End Mills, engineered for the efficient milling of graphite, reinforced plastic, carbon fiber, and non-ferrous materials. Featuring outstanding wear resistance and a versatile product range, these end mills ensure precise and reliable performance across various applications.

2, 3,4 Flutes Diamond Coated Taper Neck Ball End Mills for Graphite, reinforced plastic, carbon fiber, non-ferrous and non-metallic materials offer several advantages due to their excellent wear resistance and wide range of product offerings.The key features and benefits:

1. CVD Diamond Coating: Applying a qualified CVD (Chemical Vapor Deposition) Diamond coating enhances the wear resistance of the End Mills , ensuring a longer tool life and consistent performance.

2. Taper Neck Design: The Taper neck design provides additional strength and rigidity, reducing the risk of tool deflection and improving accuracy.

3. Versatility: These end Mills are designed for a wide range of materials, including graphite, reinforced plastics, carbon fiber, non-ferrous materials, and non-metallic materials.

4. Smooth Cutting Action: The excellent wear resistance of these EndMills  results in a smooth cutting action, minimizing material deformation and reducing the risk of tool clogging.

5. Improved Surface Finish: The smooth cutting action also leads to better surface finishes on machined components.

6. Wide Range of Products: A wide range of products are available, including various end mill geometries and coating options, to suit specific machining requirements.

To maximize the benefits of Diamond Coated Taper Neck Ball EndMills for Graphite and other materials, consider the following actionable steps:

1. Choose the right coating and geometry: Select the appropriate End mill coating and geometry based on your specific machining requirements.

2. Optimal cutting parameters: Follow the manufacturer's recommended cutting parameters, such as spindle speed, feed rate, and depth of cut, to ensure optimal tool performance and longevity.

3. Coolant selection: Use coolant or lubricant specifically designed for your machining application, as it can help reduce tool wear and improve tool life.

4. Regular tool maintenance: Inspect the EndMills  regularly for signs of wear or damage. Replace them when necessary to maintain consistent performance and prevent tool failure.

5. Proper storage: Store the EndMills  in a clean, dry place to prevent damage and prolong their lifespan.

6. Operator training: Ensure that operators are properly trained in the safe and efficient use of EndMills  , as well as understanding the importance of following safety guidelines and proper maintenance procedures.

How to Buy

Request an Equipment  Quote   

Ready to buy stuff from Flexible,Request a quote now.


Browse Parts and equpments on our store


Del dine tankerVær den første til at skrive en kommentar.

Q: What is the maximum depth of cut recommended for an end mill?

With a cut equal to the full width of the cutter, the maximum recommended depth of cut (ap) is 0.6 D. If, however, the cutting action is the cleaning up of the edge of a component, with the cut only 10 per cent of the diameter, the depth can be increased to 1.5 D.

Q: What is the diameter to depth ratio for end mills?

In general, a good rule of thumb is to use a cutting depth that is no more than 1-1.5 times the diameter of the end mill. For example, if you are using a 1/4-inch end mill, the recommended cutting depth would be between 0.25 and 0.375 inches.

Q: What is the difference between a slot cutter and an end mill?

The primary distinction between end milling and slot milling is the way they cut. A slot mill may plunge like a drill and then cut across like an end mill, combining drilling and lateral cutting capabilities. An end mill, on the other hand, mainly concentrates on lateral and horizontal cutting.

Q: What is the length to diameter ratio for end mills?

Design milled areas so that the end mill required is limited to 3:1 in length to diameter ratio. As shown in the figure below, longer end mills are prone to chatter. implemented: When designing a three-edge inside corner, one of the inside edges must have the radius of the end mill.
bottom of page