top of page



Unleashing the Full Potential of Diamond Coated Ball Nose End Mills in Graphite Machining: High Hardness, Wear Resistance, and Versatility.

Diamond Coated Ball Nose End Mills for Graphite offer several advantages due to their high hardness Diamond Coated  and good wear resistance. These End Mills are particularly suitable for corner angle cleaning processing of graphite electrodes and can deliver high performance on a variety of materials.The key features and benefits:

1. High Hardness Diamond Coating: The high hardness Diamond Coated  enhances the wear resistance of the End Mills, ensuring a longer tool life and consistent performance.

2. Lower Wear Condition Level: The Diamond Coated  maintains a lower wear condition level during high-speed processing, allowing for more efficient and reliable machining.

3. Suitable for Corner Angle Cleaning: These end mills are ideal for corner angle cleaning processing of graphite electrodes, ensuring precise and accurate machining.

4. Versatility: Diamond Coated Ball Nose End Mills for Graphite can be used on a wide range of materials, including graphite, wrought aluminum, bakelite, plastics, wood, brass, and others.

5. Smooth Cutting Action: The excellent wear resistance of these End Mills results in a smooth cutting action, minimizing material deformation and reducing the risk of tool clogging.

6. Improved Surface Finish: The smooth cutting action also leads to better surface finishes on machined components.

To maximize the benefits of  Diamond Coated Ball Nose End Mills for Graphite, consider the following actionable steps:

1. Choose the right coating and geometry: Select the appropriate End Mills coating and geometry based on your specific machining requirements.

2. Optimal cutting parameters: Follow the manufacturer's recommended cutting parameters, such as spindle speed, feed rate, and depth of cut, to ensure optimal tool performance and longevity.

3. Coolant selection: Use coolant or lubricant specifically designed for your machining application, as it can help reduce tool wear and improve tool life.

4. Regular tool maintenance: Inspect the endmills regularly for signs of wear or damage. Replace them when necessary to maintain consistent performance and prevent tool failure.

5. Proper storage: Store the End Mills in a clean, dry place to prevent damage and prolong their lifespan.

6. Operator training: Ensure that operators are properly trained in the safe and efficient use of End Mills, as well as understanding the importance of following safety guidelines and proper maintenance procedures.

How to Buy

Request an Equipment  Quote   

Ready to buy stuff from Flexible,Request a quote now.


Browse Parts and equpments on our store


Share Your ThoughtsBe the first to write a comment.

Q: What is the golden rule of milling?

The cutter position forms the chips, and you should always aim for thick chips upon entry and thin chips upon exit to ensure a stable milling process. Remember the golden rule in milling – thick to thin – to ensure the lowest chip thickness possible when exiting a cut.

Q: Can carbide end mills be sharpened?

When you look at the price of a new, quality carbide end mill, hell yes, it's worth sharpening them. High speed steel, less so than carbide, but still worth it. Keep in mind that once they are sharpened, they will be smaller in diameter.

Q: Can an end mill plunge cut?

Tool Design: Some 4 flute end mills are designed with a center cutting geometry, allowing for plunging. However, others might be non-center cutting, which makes plunging difficult. Material Considerations: As mentioned, the type of material being milled can influence the choice of end mill.

Q: Can you drill down with an end mill?

If you're making a very small hole, say, less than 1.5mm in diameter, go with a drill. End mills under 1.5mm become increasingly fragile, and subsequently cannot be run as aggressively, as a drill can be. If you need to make a very deep hole – in excess of 4x your hole diameter, choose the drill.
bottom of page